High Performance
AP8000 is designed with the most advanced programming technology. The highest programming speed
and the precise pin driver circuit make the highest production throughput in high quality possible.
Features:
There Operation Modes
Online Mode: Connected to a local PC through USB2.0 (high speed).
Network mode: Connected to local network, controlled locally or remotely.
Stand Alone Mode: Using the stand-alone keypad, LCD display, and mobile
memory (standard SD cards), you can run the programmer independently off-line
for flexible production and field setup. Project file size is only limited
by the SD card memory size. It can be operated easily and conveniently
independent of a computer which is important for mass production of device
programming.
Wide range of IC coverage Supports almost all serial chips which includes, but not limite
to NorFlash/Nand flash,EMMC,EEPROM,EPROM,Micro-controller,CPLD,CMOS,PLD,FPGA,
Anti-fuseandother,customized devices.
Embedded High-speed FPGA Band Width is as fast as more than 1.6Gb/Sec ,
which allows a device be programmed at the highest speed that it permits.
Wide voltage range Supports all kinds of programmable devices with Vcc
as low as 1.2V or as high as 13V.
Advanced precise pin driving technology Provides high-speed, stable and
precise signals to make programming faster at higher yield rate.
Device safety protection mechanism. There is a precise internal voltage self-test
circuit to ensure that the voltage is within the expected range at any time.
The self-test function guarantees that any hardware problem be detected at any time.
The pin insertion check function detects pin poor contact when a device is inserted
in a wrong direction or when the device pins are poorly connected with the socket.
The device ID is verified before the programming flow runs.
Programmer Protection: Over-current, over-voltage protection and ESD protection for
safety of the chip and programmer hardware
Environment Friendly Environment friendly with the power consumption rate high than 90%,
no fan needed.
Easy and Convenient Operation Choosing one of the connection modes, USB, RJ45 or SD card,
you can operate your programmer immediately after setting the programming function
(Program,Verify,Auto…).
Powerful software system with user-friendly interface: simplifies operation, improves efficiency
and reduces mistakes.
1) Project function simplifies processes such as device selection, file loading, device
configuration setting, program option, and batch file setting into one touch step.
2) Auto command combines device operations like program, verify, security into a single command
at any sequence.
3)Initiated by an external start signal, generally the signal of fixture close. Once the signal
is detected, the system runs automatically.
4)Data to be programmed to each device can be different. The software will automatically update
the programming data according to the user’s requirements including standard or customized
SN generator(such as MAC address)
5)Log file is useful for quality tracking.
6)Copyright Protection: Copyright Protection with SD encryption, project file encryption and
access control, volume control and remote control.
7)File Format: Support and recognize almost all known file formats automatically.
8)Evident real-time display of programming status and production analysis statistics.
9)Customized Algorithms: Accepts special function software customization requirements.
10)Image File Management: Powerful image file management including ECC, bad block management and so on.
Device Support
FLASH Device:
Supports devices from the popular IC manufacturers, including:
Atmel Hynix Macronix Micron
Samsung Spansion Toshiba ... and many more!
Including:
NAND NOR MoviNAND iNAND
eMMC eSD GBNAND SD
MMC OneNAND ... and many more!
NAND Flash Bad Block Management
• Skip bad block
• IC manufacturer Approved other bad block management schemes.
Microcontollers:
Atmel Cypress Freescale Infineon
Microchip NXP Renesas Samsung
ST Silicon Labs TI Toshiba
... and many more!
Supports all the popular packages:
TSOP CSP SOIC SSOP BGA
FBGA uBGA EBGA TFBGA QFP
TQFP PLCC PoP ... and many more!
Common programming function options:
Program Read Verify Blank Check
Illegal Bit Check Erase Secure PinContinuity
Protec/UnProtect Autosense
Specifications
Communication Interface
• RJ45 Interface
• USB Interface
Electronical Requirements
• Operating Voltage: 110 to 240 VAC
• Power: 3 watts
• Frequency Range: 50 to 60 Hz
Physical Specifications
• Width : 16.0cm
• Length : 22.6cm
• Height : 6.9cm
• Weight : 2kg
Environment Requirements:
• Normal office environment/power supply
Temperature
• Operating: 0°C to +50°C
• Transportation: -4°C to +70°C
• Storage: 0°C to +70°C
Humidity
• Operating: 70% no water condensation
• Storage: ≤80% no water condensation
Service
• 1 year warranty
• life cycle free software upgrade
Computer Requirements:
• Operating System: Windows 2000, XP or later
• Hardware Capacity: ≥2 GB plus the data file size
• SD Card Slot (used for the project card, optional)
• Network Interface
• USB Interface
• CD ROM Driver
• Serial or USB mouse
Standard Components:
1. AP8000 main unit
2. AC power cord
3. USB 2.0 cable
4. Ethernet cable
5. Driver CD
6. Instructions for Use(this manual)
7. Guarantee Card
8. Disclaimer